Drop N Grow · German distribution

A flower room, delivered finished.

Light, climate, irrigation and controls in one container. Connect power, water and internet and start the first cycle.

Drag to rotate
18kgdry per cycle (plan value)
60daysper cycle
3–4monthsfrom payment to delivery
€100,000net per unit, plus shipping

18 kg is the value we plan with. It is based on results of the units so far and is not a guarantee; the outcome depends on genetics, management and site.

Construction

Assembled and taken apart.

On the left, the unit as it is delivered. On the right, the same unit as an exploded drawing: every assembly on its own. Both models can be rotated.

AssembledOne insulated unit: place it, connect it, start.
Exploded viewRoof, fit-out, shell and door shown separately.

The unit comes from our planning model, as it stands in the facility. Shown to explain the construction, not a manufacturer's engineering drawing.

Time

Months instead of years.

A flower room in a conventional building needs planning, construction and fit-out. The container is built and tested at the factory.

Conventional facility build*
18+ months
Container: delivery from payment
3–4 months

* Comparison figure from the manufacturer Drop N Grow. The duration of the licensing procedure comes on top in both cases.

Tour

Once through the unit.

Six stations, from the anteroom to drying. All photos show Drop N Grow units in operation.

Anteroom with a view into the plant roomPhoto: Drop N Grow
01

Anteroom & fertigation

You enter through a separate anteroom. Here sit the nutrient dosing, the controls and the hand-wash station, separated from the plant room.

  • Dosatron dosing with Bluelab monitoring
  • Separate entry zone before the plant room
  • Growlink control cabinet
Plants on two benches with a centre aislePhoto: Drop N Grow
02

The flower room

Two long benches with a centre aisle use the full length of the container. Every plant sits at the same distance from light and air.

  • Uniform canopy across the full room
  • White, wipeable surfaces
  • Centre aisle for work and inspection
LED bars above flowering plantsPhoto: Drop N Grow
03

Light

Sixteen full-spectrum LED fixtures cover the canopy evenly. Intensity is controlled through the recipe, not by hand.

  • 16 × Lumatek 600 W LED
  • Dimming by growth phase
  • Even light distribution to the edges
Substrate blocks with drip linesPhoto: Drop N Grow
04

Irrigation & substrate

Each plant is supplied by its own drip line. Substrate sensors report moisture and nutrient level, and irrigation follows these values.

  • Drip irrigation per plant
  • 4 substrate sensors per room
  • Athena nutrient programme
View from the room camera onto the canopyPhoto: Drop N Grow
05

Climate & monitoring

A 6.5-ton HVAC unit and dehumidification hold temperature and humidity on target. A camera and sensors make every unit visible from afar.

  • 6.5-ton HVAC
  • Dehumidification up to 656 L per day
  • Live camera and remote access via Growlink
Plants hanging to dry on racksPhoto: Drop N Grow
06

Harvest & drying

After around 60 days the room is harvested. Drying takes place in a matching drying container with controlled air exchange.

  • Drying container available as an add-on
  • 8 tiers, 750–850 plants
  • Dehumidification 390 L per day
From operation

What grows in the units.

Photos from running Drop N Grow units. Drag to browse.

Canopy under LED light
Flower room
Flower close-up
Harvest
Room camera view
Live camera
Flower top
Late flower
Flower close-up
Harvest
Aisle between benches
Centre aisle
Propagation racks
Propagation container
Cutaway illustration of a propagation container
Propagation container (illustration)
Flower close-up
Harvest
Room camera view
Live camera
Flower close-up
Harvest
Technical data

The unit in figures.

FormatContainer, insulated
Yield per cycle18 kg dry (plan value)
Cycle length60 days
Lighting16 × Lumatek 600 W LED
Climate6.5-ton HVAC, dehumidification 656 L/day
IrrigationDrip irrigation, Dosatron, Athena
ControlsGrowlink, remote access, camera
SensorsClimate, 4 substrate sensors
Labour3–5 hours per cycle (manufacturer figure)
ConnectionsPower, water, internet
StandardsDesigned for GACP and GMP environments
Delivery time3–4 months from payment

Technical data as stated by the manufacturer Drop N Grow. Whether a facility complies with GACP or GMP is determined by the competent body for the facility as a whole.

From order to harvest

How an order proceeds.

Operating the unit requires a valid licence at the site. If it is still missing, we support the procedure in parallel.

01

Request

Quantity, site, licence status.

02

Quote

Price including shipping to your site.

03

Payment & build

The unit is built and tested.

04

Delivery

After 3–4 months: place it, connect it.

05

First cycle

60 days to the first harvest.

Crane placing a container module on its padVisualisation
Contact

Tell us where you stand.

A first call takes about 30 minutes. Afterwards you know which steps come next for your project and whether we are the right partner.

  • 01You describe the project, the site and the current status.
  • 02We say plainly what is feasible and what is missing.
  • 03You receive a proposal for the next steps.
We use your details only to handle this request.
First callRequest container